Ask Experts Questions for FREE Help !
Ask

Search:

Type: Posts; User: ibadullah

Search: Search took 0.00 seconds.

  1. Answers
    0
    Views
    850

    Electrical engineering Question

    Main system losses of transformer fed, geared electrical drive system for ships propulsion, from the electrical power source through to the propeller?
  2. Answers
    3
    Views
    1,418

    did u make the ac generator or buy it I think...

    did u make the ac generator or buy it I think there is no change in magnetic flux done by the coil your voltage depends on the number of turns and change in flux according to faraday
    ...
  3. Yes

    Yes
  4. Answers
    7
    Views
    834

    If u charged the after one year then obviously it...

    If u charged the after one year then obviously it can't charged but I will suggest u to take out the battery and give it the high voltage e.g. if battery is 12v then u have to give it 20 volts this...
  5. Every cable has the ambient temperature for...

    Every cable has the ambient temperature for example 40*c if the temperature of the surrounding is greater than the ambient temp of the cable then the conductor of cables become heat up which...
  6. Comment on tkrussell's post

    Thanku yes I know that calculation is different frm the practical
  7. as u know the formula of power is P=sqt3*V*I ...

    as u know the formula of power is P=sqt3*V*I
    1hp=746w
    7.5hp=746x7.5
    =5595w
    so 5595=208xI
    and I=5595/208x1.73
    I=15.5A
  8. the formula of resonance frequency is ...

    the formula of resonance frequency is
    fr=1÷2π√ LC

    fr = 1.3kHz
  9. In SI unit 1 Nm = 0.738 ftlb so 1/0.738 = 1 ftlb...

    In SI unit 1 Nm = 0.738 ftlb
    so 1/0.738 = 1 ftlb
    1.355 Nm = 1 ftlb
    (1.355 x 100 x 300) Nm = (100 x 300)ftlb
    406.5 Nm = 300 ftlb
    so P = nT/9.55
    where P in watt, 'n' is an rpm, T in Nm and 9.55...
  10. In SI unit 1 N·m = 0.738 ft·lb so ...

    In SI unit 1 N·m = 0.738 ft·lb
    so 1/0.738 = 1 ft·lb
    1.355 N·m = 1 ft·lb
    (1.355 x 100 x 300) N·m = (100 x 300)ft·lb
    406.5 N·m = 300 ft·lb
    so P = nT/9.55...
  11. Answers
    1
    Views
    641

    It depends upon the current rating of the motor...

    It depends upon the current rating of the motor I-e if motor current rating is 1 amp then you use the diode which have current rating greater than the motor I-e 1.5 or 2 amp
  12. The difference between single phase and three...

    The difference between single phase and three phase is that the single phase is just an alternating waveform of about 110 or 120 volt where as two phase are the two alternating waves that are 180...
Results 1 to 12 of 14