Ask Experts Questions for FREE Help !
Ask

Search:

Type: Posts; User: jromer81

Search: Search took 0.01 seconds.

  1. Answers
    11
    Views
    2,962

    Replaced the fuel filter because it needed to be...

    Replaced the fuel filter because it needed to be done. Turns out the problem was the fuel pressure regulator. Thanks for all of the help and I'm glad it is fixed.
  2. Answers
    11
    Views
    2,962

    Throttle position sensor tested out OK replaced...

    Throttle position sensor tested out OK replaced the coil pack hoping to solve the problem. Replacing the coil did not fix the problem. I also ran some Mopar Combustion Chamber cleaner through it...
  3. Answers
    11
    Views
    2,962

    So far I have replaced the following items with...

    So far I have replaced the following items with no luck fixing the problem.
    Plugs
    Plug Wires
    Coolant Temperature Sensor
    Crank Sensor
    MAP Sensor
    Intake Air Temp Sensor
    Idle Air Control Valve
    ...
  4. Answers
    11
    Views
    2,962

    Yes I was sure to put in the Champion plugs and...

    Yes I was sure to put in the Champion plugs and made sure they were gapped correctly before putting them in. Could the MAP sensor be causing this as well? The car runs great once it starts only has...
  5. Answers
    11
    Views
    2,962

    I replaced the ECT Sensor and the problem is...

    I replaced the ECT Sensor and the problem is still there. It starts a little better but you still have to push down the gas pedal while the car is cranking to get it to start. After replacing the...
  6. Answers
    11
    Views
    2,962

    96 Chrysler Concorde 3.3L Won't start warm

    I have a 1996 Chrysler Concorde 3.3L That once it is warmed up if you let it sit for a half hour or longer won't start unless you hold the key down let it crank for a while and press the gas pedal....
Results 1 to 6 of 8