Search:
Type: Posts; User: raj2160
Search:
Search took 0.00 seconds.
-
Are you talking about the Celtic knot?
-
I would check the "interesting traffic" on the l2tp vpn, that is what ips it is allowing to pass to the internal network through the vpn.
-
You didn't say if the virtual servers are in the same network as the other windows 2008 server.
-
You need to give more information. Are you talking about internal ip addresses assigned to the clients, the switches, or external ip addresses?
-
This is actually easier than you think and is done for all companies I've worked for
You just need to create the acl with allow entries before deny entries
So allow mail host any port 25
Deny...
-
Are you saying that on 1 subnet (remote 1) there are 60+12 = 72 hosts and on the other subnet (remote 2) there are 62+28 = 90 hosts.
Use 192.168.1.0 /25 and 192.168.1.128 /25
If remote 1 is a...
-
You don't have write access. Make sure you are not trying to write to read-only media like dvds or your destination dir is writable (or you have permission to write to destination or setup is not...
-
You will block legitimate addresses if you use the first 2 octets to block address because you have to remember based just on the first 2 octets you are blocking 65,533 hosts or computers(minus...
-
No, not necessarily especially if both entries point to the same operating system so if both point to Windows XP, most likely it is a 2nd install that was done without wiping the partition first or a...
-
Your default class addresses are Class A 0-127, Class B - 128-191 Class C - 192-223 for the 1st octet values
Classful ip addresses are ip addresses that follow this standard subnet ranges for...
-
Have you tried changing the default port terminal services uses. You can change it via a registry change and use the client to connect by using <ip>:<port> as the address from the client.
-
I am assuming you want to do this with as little $$ as possible. You can use Vmware GSX which is free but will require at least 2GB of memory to make usable virtual machines for 3 systems or since...
-
Use the failover command to configure
You'll know it's right when you do a show failover and you see primary and secondary interfaces as normal and active / standby. You can do active / active in...
-
You can have a solid link without having an activity link (either green or amber); both usually point to a physical or negotiation problem.
-
The prior poster pretty much answered your question - no amber light (or link light) refers to a layer 1 or 2 problem (of the OSI) either caused by physical hardware (router ports, nic ports,...
-
Subnets don't matter. They just specify whether the network is local or foreign to the router. If you're trying to connect to the share remotely, then most likely you're being blocked by the remote...
-
A simple view of a domain is a central database that allows users to connect to different network resources using the same credentials (username and passwords). Of course, all resources will need to...
-
Thanks,
Worked like a charm. Boiler is up and running. Was indeed a short to ground.
-
Hi tom,
Glad I could help. Most people don't think to check the RAID controller so it was the first thing that came to mind. Make sure to have good backups because I don't know if you're aware...
-
Hi Hvac1000
My boiler is steam. Circuit diagram is the same as on on page 8 of...
-
Thanks, just got it last night and it worked though it seems I have other problems to worry about. When I turned it on everything seemed fine. Connected the 24V controls and the boiler got power...
-
XP is easy to reset. There are commercial tools available but there is a freeware program as well that essentially mounts the volume in linux and modifies the registry files to reset the password.
...
-
You need to check whether the hard drive is plugged into the RAID controller. If it is; you'll need to go into the Raid Controller BIOS at boot and set it as standalone(JBOD) to see the drive in...
-
Best to boot from the laptop hard drive especially since you're trying to recover data; and just use the old HD as the external USB drive. If most of your documents are stored under "My Documents"...
-
I'm looking for a transformer with a circuit breaker to replace a White-Rodgers 90-112 transformer/relay. I can't find the combination with a breaker so I figured I'll buy the transformer and then...
-
A+ and CCNA will get you basic Helpdesk or Junior Networking. To get CCNP you need CCNA. You cannot name your salary because A+ and CCNA are entry level but it is a foot in the door for interviews...
-
Lenovo has a utility called Rescue and Recovery that creates a hidden filesystem that is not accessible by the file system. Go to Thinkvantage - rescue and recovery - view all backups and delete...
-
Use VLANS to separate the broadcast domains from one another. That will keep the other DHCP from responding since it will be in a different broadcast domain.
|