Search:

You have to prove it to the m.r.o. and no one else. They have to than verify it with the doctors office and revieve verbal and written confimation of the drug. They will than post the test as passed...

I think this post needs help... if you want to attack me attack me in a post all about me. Or bring your issues up with me personally. Otherwise move on people!!

Actually I am talking about it because I administer drug and alcohol tests. And it is a violation to discuss with test giver or employer. You can only discuess it with the medical review officer....

...

Good luck with that... it might be, but most are high volts. I say just start placing wires wherever and see if it works. You seem to know everything you need to anyway. Why not give the old college...

So you are trying to conect your humidifier to your furnace control board?
You need to be careful so you don't apply a 24 volt line to 120/240 volt.
Color is not going to matter. I have seen some...

If they are both at the same spot than there is a very good chance you have bad valves.

You should check the blower motors capacitor and the blower motor.

The high side wiring is fried!! There could be several reasons.

Sorry... I already told you it will not work that way. You will damage something. You need to go get that new capacitor.

6 and 7 bar? Not sure what you mean. My guages go from 0 to 400.
Either way you have a problem. Maybe a blockage, mabe bad valves on compressor.. maybe something else.

Yea.. its not going to work with your old cap. Unless that motor has capaility of being wired three wire and I don't think it does.
Sorry but going to have to go back to grainger and get a separate...

You could have a bad relay, reversing valve, 24 volt problem, tstat, or emergancy heat/secondary heat problem.
Also your compressor might not be coming on.

Honestly I suggest having a tech come...

Also there should be something on your old silver cap that will say something like 30/5 mf.. what is that rating? And what does the new motor say it needs for a capacitor?

Should have got a new run capacitor for new motor. Sorry. The old one might not be the right rateing.

Also is there any directions with the motor? Maybe it has a wiring for three wire use? Some do...

Did you get a new capacitor for the fan? Is it a single or dual cap? If it is a single cap than do this.
Take the brown wire off the old cap.
Put your two new brown wires on the new single cap....

Just answered you on old posting...

Did you get a new capacitor for the fan? Is it a single or dual cap? If it is a single cap than do this.
Take the brown wire off the old cap.
Put your two new brown wires on the new single cap....

So wait was this motor new or used? If it was used your in trouble.. more than likely a bad motor. If it was new you might be okay.

Most motors not all have a set of wires that control the...

Not sure what you are talking about.. more info please.

It is more than likely in the fridge. A lot of times the controls are behind the light fixture.

Are you trying to replace the power head of the whole valve?

2 and one half years later... lol

This post is over two years old... and people are still trying to help. LOL

Its not the ac... 410 a does not smell. It has to be something else.

If unit is brand new call the installer back out. It should be under warranty. I doubt there is a belt in there. Most household systems nowadays don't use belts.

Maybe the transformer in your furnace went bad...

I agree get a second or third opinion, but don't say a word to them.
Also r22 is not being phased out completely. Yes theys top making it next year. But it will be around for 60 plus years. I can...

See your question said nothing about one vs the other. Neither one is really more efficant than the other. Seer ratings for both are the same. 13 is 13. 16 is 16. 19.5 is 19.5.
I find it funny that...

Probably not... what kind of system is this again? Might be easier to just leave low pressure switch out of loop.

No they should be at same end... might not have a filter in there at all. Do you use filters in grills in the house?

Call a real company out... this person replacing the freon everyother day could be in big trouble. They are breaking several laws here.

Yea I would have it looked at. If it is a 24 volt problem they can be tricky and hard to find.

Might try pummling wires from tstat. Make yourself a diagram. Cut the wires back and make fresh...

Try cleaning the outdoor coils... if they are dirty the compressor will overheat and could be tripping on thermal overlaod. Might also want to have the capacitors checked and maybe even check the...

Blowers usually have run caps not start caps... could be a blower motor issue. Coule be a wiring or power issue... would need more info. Might want to call a tech out to check it too.

Not sure about canada.. but in the states it is illegal

All ac units, heat pumps, and furnaces come with capacitors for the fan and compressor unless you have a three pahse system. Three phase systems are generally commercial.

A capacitor helps the...

That means nothing at this point and time. Sorry I forgot to say those prices are for parts and labor.

That really depends on your area and what contractors charge. In my area a capacitor could run you $70 to $200. And a fan might run $350 to 500.
Good luck and let us know what you find out.

Also...

Scrap it is...

It is now just called climatrol... how old are these units? I would say more than likely they are just good scrap now.

Most tranes do not have reset buttons. If the fan has stopped could be a good chance the fan is bad or the capacitor for it is bad.
Turn the power off to unit and see if the fan moves freely by...

I understand that. But you originally had a three ton unit inside and out? Your ductwork was designed for that unit. Any altercation in size of unit could need a change in ductwork. And why a...

Might have to go to furnace/air handler and remove panel and see what wires connect to what. Also most honeywells you might have to program weather it is o or b operation of reversing vale on...

$7000 dollars in difference of cost? Is this quote from the same person? I would get other quotes. That seems like a huge difference in price? Are they offering any rebates from the manufacturer? The...

If your compressor tripps the breakers that quickly your compressor is more than likely grounded. This means the compressor needs to be replaced. I would not recommend doing that on a 20 year old...

Wait.. so you went from a 3 ton to a 3 1/2 ton with a 4 1/2 ton furnace? That makes no sense at all. If that is the case no wonder you have issues. Before you go making all sorts of changes I suggest...

I don't think so... might have a bad board or transformer.

First off you needed to label the wires with what they were connected to begin with. Second off you need to turn power off while replacing t stat so you don't blow transformer.

Now take the hunter...

You might have to remove coil to replace pan, and in order to do that you need to have a license to handle refridgerant.
Might be able to replace with out removing coil, but you have to be extra...