Search:

Thanks Scott, I should have looked at that modem model before pulling the trigger!

WRT310N Support | Wireless-N Gigabit Router

Some information on setup here.

Physically, you'll use an ethernet cable to connect the WAN port to the ethernet port on the cable modem.

After...

Depends on your addressing scheme. Classfull or Classless.

More information here:

Routing Information Protocol - Wikipedia, the free encyclopedia

Is your computers IP address in the same range and using the same subnet as the router? If not using DHCP, this may have to be manually assigned.

Logmeinfree.com is a nice tool. You can set it up so that you can remotely access the computer with a minimal amount of difficulty.

Could also be a frequency issue. Maybe the wireless band from your router is different than your laptop. (2.4 vs 5.1 GHz)

Set up the wifi access security the same as though you were using the device as a router. Assign the device an address on your network (only used for management). Turn off the DHCP server on the...

D4WNO, we have a couple of similar setups in our office. I don't think remote desktop is going to get you where you want to be. At one point, we were using a program called MouseControl. It basically...

To add to cmeeks response:
Virtual Machines (VMs) allow for lower power consumption and lower cooling needs because multiple VMs can reside on one physical machine. These numbers are easy to...

The physical server and the virtual server are all on the same network, in the same IP range. While connected to a wifi extension of the same network, I am able to browse shares on both the physical...

In your last sentence, you mention your boss really needs VPN access. Are the work computers connected to the VPN when you are trying to access the website? If your VPn connection is set to use the...

I've enabled the L2TP server on my SonicWall firewall. I can establish a VPN connection over a 3G connection using an iPad and browse to shares on a physical Windows Server 2008 using a file browser...

Looking for someone out there that has set up the L2TP server on a SonicWall!

I've enabled the L2TP server on my SonicWall firewall. I can establish a VPN connection over 3G and browse to shares...

If you just need to temporarily communicate between the two devices, a cross-over cable can be used as well.

If you want to skip editing the login script, you can create the home folder and map it using Active Directory.

Open the user object in AD and click on the profile tab where you would assign the...

Are you running windows active directory? If so, you can map home folders through the AD profile without having to mess with the login script.

No one remembers the password to connect to the wireless access point, or no one rememebers the password to the management interface for the wireless access point?

What you have should be capable of accomplishing your goal(s). If you have enough bandwidth with your current comcast connection, you should be able to pass VPN and internet traffic over the same...

Forgive me if I'm getting a little repetitive, just trying to get a good idea of your setup.
You have two cabel modems.
Both have static IPs.
The Cisco 1800 is connected to both.
You want to use...

Comcast = the ISP? Have they created the VPN for you on their equipment? I know of ISPs in my area that provide similar services.

Is the VPN already established on one internet connection?
Configuration varies by router type, but you should be able to set one interface as the default for all internet traffic, and then only...

Does the server have two NICs or are you connecting through a router/switch?

Search continues... setup is for a security station monitoring several cameras from remote locations.

AV = antivirus, good spyware bot program is a good idea as well, Microsoft Security essentials or Malwarebytes both available at no charge.

Not 100% on this, but most monitors I've seen capable of a 90 degree display rotation have some software associated with the display to switch back and forth.

I'm looking into an 'operations center' type setup that will include 24 monitors and 2 flat screen televisions that will all need to display different content. I'd like to use as few PCs as possible.

When you are isntalling the print driver, you should have an option to create a new port. When you create the TCP/IP port, you use the IP address that you assigned to the printer.

I managed to mis-key an entry that has killed my web interface, or access to it. I would like to access the Sonicwall 240 using the console and remove the last service objects/address objects and...

jkraw90, thanks for the suggestions! I had checked the network setting repeatedly, thinking I might have missed something as I did not set up the firewall or the NAS. I finally read somewhere that...

Our company has offices in two cities with a VPN conecting the two. We recently setup a Buffalo Terastation NAS in one city and cannot access it from the other. All other devices in the city with the...

Thanks raj! I set it up to block all outgoing to port 25 then created one to allow the IP of the mail server and listed it as a higher priority than the deny all. We can still send mail so it appears...

I'm hoping someone can help me out here. Our company has a new Sonicwall Firewall installed. We recently became blacklisted due to a virus/trojan and some SPAM. I believe I need to block all...

Not sure, is there an easy way to check to see if my drive will support a dual layer burn?

I'm trying to burn what appears to be about a 5.5GB ISO image using roxio. Before looking at the size of the file, I dropped in a DVD + R and quickly learned the size of my ISO image.

Any tips or...

Just got finished playing with an inspiron and I can understand your confusion. I was having the same issues with the clone on the first run, then just kept getting the extended desktop.
They key...