Search:
Type: Posts; User: cardomb
Search:
Search took 0.00 seconds.
-
I am not sure if this is the correct forum to ask this question therefore if anyone can assist or direct me to the correct forum, I would appreciate it. My question is about running piping for an...
-
I have a metal building with a metal entrance door. It already has a door knob lock, however I would like to install a deadbolt. I know how to install a deadbolt on a wooden door, but never...
-
I have completely wired my workshop with 20 amp breakers using 12 ga wire. I now want to add 30 amp breakers for 240 vac. I will use 10 ga wire but I am not sure on what socket to use. I am...
-
I would like to add outside flood lights to my metal workshop building. Since all the wiring will come from the interior of the building, do I need to use special water tight wiring to install the...
-
I have already run my sub panel and you would think I would remember how to wiring multiple receptacles. But I don't! Ok, here is what I am trying to do. I have a 20 amp circuit and I am...
-
I installed a 100 amp sub panel in my sorkshop. I used #2 wire for hots and neutral. I also used #6 green. My sub panel neutral and equipment ground are not bonded. Since I am running the neutral...
-
I now have the 100 amp breaker installed in my load panel. I will run wiring from the load panel to a 100 amp sub-panel in an unground 80 schedule PVC. I believe I need to use #2 wire for the hots...
-
OK, getting closer. It sounds like even though I have a cuttler hammer panel which has a max of 10 tandem breaker slots (slotted bar), I can still add a tandem breaker (one that is a non-ctl) to...
-
OK I understand the difference between CTL and Non-CTL. I am becoming confused. I had a licensed electrician give me a quote to install a 100 amp 2 pole breaker into my 40 space panel. But he...
-
Thank you for the response on my sub panel questions. I finally found a slim line breaker which will work in my main panel. I can now consolidate two breakers to give me room for a 100 ap breaker. ...
-
I have a 200 AMP main panel for my residence with all the breaker slots filled. I plan on removing 2 20 amp breakers and installing a 1 60 x 2 20 amp consolidated breaker in to the panel. Well at...
|