Ask Experts Questions for FREE Help !
Ask
    Chazman3's Avatar
    Chazman3 Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 29, 2010, 06:37 PM
    How do I setup a password for the router to access the internet?
    My router is the DI524
    ITstudent2006's Avatar
    ITstudent2006 Posts: 2,243, Reputation: 329
    Networking Expert
     
    #2

    Dec 29, 2010, 07:11 PM

    Is the router already setup and is currently unsecured?

    If so:
    You have to log into the routers web interface, go to the wireless/security and there you can setup your encryption type and PSK (pre-shared key) ie: password

    If not:
    If you know nothing about routers then follow the guide given with the router. If you do then setup the router and then follow the steps above to log into the web interface!


    NOTE 1: That when you are logging into the routers web interface you will be prompted for a username and password. The default one (assuming it wasn't changed) is listed below.

    Username: admin/Admin
    Password: (blank)

    NOTE 2:To log into your web interface you must type in the default gateway of your network ie: the routers IP address into the URL Bar of your browser.

    NOTE 3: For you router I believe it is 192.168.0.1
    However you can go to command prompt and type ipconfig to list your default gateway.
    Scleros's Avatar
    Scleros Posts: 2,165, Reputation: 262
    Hardware Expert
     
    #3

    Dec 29, 2010, 07:19 PM

    I'm not positive what type of password you are referring to. In addition to wireless passphrases to derive keying, several others come to mind:
    1. Password to access router's web based administrative interface - Configured on the Tools / Admin tabs in the administrative interface. The default username/password combination is "admin" with a blank password.
    2. Password for a PPPoE connection - Configured in the administrative interface on the Advanced / WAN tabs.
    3. Password for controlling client devices' access to the Internet - This router does not have this feature. However, it can filter access on a time based schedule either by IP filtering or via firewall rules.

    I suspect you desire #3, but you're out of luck with this router and also most routers as this isn't a common feature. A proxy server, content filter, or captive portal device is usually used in addition to a router to provide granular access control for specific protocols via a password or other authentication method.
    ITstudent2006's Avatar
    ITstudent2006 Posts: 2,243, Reputation: 329
    Networking Expert
     
    #4

    Dec 29, 2010, 07:24 PM
    Quote Originally Posted by Scleros View Post
    I'm not positive what type of password you are referring to. In addition to wireless passphrases to derive keying, several others come to mind:
    1. Password to access router's web based administrative interface - Configured on the Tools / Admin tabs in the administrative interface. The default username/password combination is "admin" with a blank password.
    2. Password for a PPPoE connection - Configured in the administrative interface on the Advanced / WAN tabs.
    3. Password for controlling client devices' access to the Internet - This router does not have this feature. However, it can filter access on a time based schedule either by IP filtering or via firewall rules.

    I suspect you desire #3, but you're out of luck with this router and also most routers as this isn't a common feature. A proxy server, content filter, or captive portal device is usually used in addition to a router to provide granular access control for specific protocols via a password or other authentication method.
    What? The OP sounds like they just want to secure their network. This router is capable if securing your network!
    Chazman3's Avatar
    Chazman3 Posts: 2, Reputation: 1
    New Member
     
    #5

    Dec 30, 2010, 05:58 AM
    Thank you ITstudent2006 and Scleros for your responses! I was able to access the router and setup a WPA-PSK Passphrase under the wireless tab. At first, I tried using Firefox and the apply button did not work. I checked the web and other users had the same problem. There were suggestions to use IE 6.0 or higher, which I did, and it worked.

    Thanks again,
    Chazman3
    ITstudent2006's Avatar
    ITstudent2006 Posts: 2,243, Reputation: 329
    Networking Expert
     
    #6

    Dec 30, 2010, 06:51 AM

    Glad to see you got it all straightened out!

    Have you read the Wireless Security: THe Breakdown Sticky in the wireless section? It shows you why securing your network is important and why you made the right choice to do so!

    Wireless Security: The Breakdown (click to read)

Not your question? Ask your question View similar questions

 

Add your answer here.


Check out some similar questions!

Internet not recognized (can't setup router) [ 1 Answers ]

Hi I found this board and hope someone can help. I can currently connect to the internet on my PC via broadband connection but not via LAN. It says I am connected by multiple networks. When I run an online check with the router (or other) software it says internet connection not detected. When...

I forgot my router access password to connect [ 1 Answers ]

How do I get my router accss password for gateway wireless router

I cannot access the web setup on my Linksys WRT54G router [ 1 Answers ]

I have attempted to access the default setup IP address for my Linksys router, but am unable to. My router is a WRT54G Linksys Wireless router, which my wireless devices (Macbook, Toshiba notebook and a new Eee miniature notebook) can no longer access, so I was trying (in vain) to access the...

Internet access using a router. [ 3 Answers ]

I have a home network with 2 computers, both using windows 98se. I use a router to connect both computers to the internet, however, the secondary computer can no longer access the internet. I have a connection between the 2 computers but no internet connection only on the second computer. What...

Setup an password in folder access [ 5 Answers ]

Dear sir; I want to setup an password in my desire folder I have win98 folder what should I do to protect my folder from other without changing my user account


View more questions Search