I am redoing my kitchen and had some corian given me from another kitchen.
there is enough to do my countertop but I need to cut it to fit. can you advise me
the best way to cut it without breaking it and how to seal the seams thank you.

marie

(removed per site rules)

Cut with a circular saw and 40 tooth carbide blade and a straight edge. Corian is heavy, support both sides of the cut to prevent breaking as you finish the cut. If possible cut from the bottom side. That way any chipping caused by the saw tooth exiting the cut is minimized. Cut at a comfortable speed. Don't cut too fast to cause chipping, don't cut too slow as that can cause melting from heat of the blade.
Corian is the same material and color all the way through, no sealing of edges, just sand lightly.