DSC PC 1832 programming troubles
Hi…I am currently replacing an old DSC PC 2525 home security system with a newer PC 1832. The trouble is… I am having difficulty even getting to first base programming this unit Is there someone on board who can walk me through this?
This is what I have: 2 new keypads.. a pk 5501 at the front door, a pk 5508 at the rear.
2 motion detectors ( both 4 wire Bravo pir) and 4 door contact switches.
I would prefer my system work as follows:
Zone 1 …Front Door…30 second exit time delay 45 second enter time delay.
Zone 2… bi pass…not used at present
Zone 3….. Motion Detector basement…instantaneous alarm when tripped
Zone 4... Motion Detector family room…instantaneous alarm when tripped
Zone 5….Patio Door…. 30 second exit time delay 45 second enter time delay.
Zone 6… Back Door…. 30 second exit time delay 45 second enter time delay.
Zone 7… Back Garage Door... 30 second exit time delay 45 second enter time delay.
Zone 8…bi pass…. Not used at present
We only use this system when we are away from home , no pets, and never in use while at home.
I have both user manual and installation guide…Any effort to help much appreciated.