I have a pc1832 and zone 9 set to front door, zone 10 set to garage door. Both are not working. At the control panel it shows zone 9 front door F PKZ and zone 10 G PKZ. This system was working fine before a hardware reset happened. Thanks ayman
I have a pc1832 and zone 9 set to front door, zone 10 set to garage door. Both are not working. At the control panel it shows zone 9 front door F PKZ and zone 10 G PKZ. This system was working fine before a hardware reset happened. Thanks ayman
All times are GMT -7. The time now is 03:56 PM. |