Designing a water filling tank..
Hi
I'm trying to make a double tank that will mix water and add the water to the 3 tank, just using water pressure from a water line.
I have a sample link animation here.. www.desktopgifts.com/sample.swf
Here's what I need to work..
The double tank on the left side has a divided top and bottom.
Tank #1 will take in water at the top, while the bottom tank will
Stay filled with the water supply #4 keeping pressure on the rubber stopper
To keep the tank#1 closed from the bottom.. When tank #3 empty's some how I want
Tank#1 to mix with tank#2 and fill Tank#3 with the mixed water..
Tank#3 has a water float in it, so tank#2 water line keeps pressure in the filled tank
To fill tank#3..
If it has to all together redesigned that's fine.
I need to mix the two tanks of water together and use the water pressure from the water line to fill tank#3
With the mixed water..
If anyone can help please contact me.. this is very important to me
To get this working..
Maybe its hard to understand what I'm trying to do here..
If its OK on the site I will pay for help solving this problem.
[email protected]
Thank you TOM