So here's my situation. I needed to change a regular electrical outlet and then a dimmer switch to a regular flicker switch. The outlet went beautfully. White wire and black wire and grounding wire all hooked up nicely and it worked! I was very proud of myself until I screwed the dimmer change up. I removed it expecting to see a white and black wire, but instead it was intertwined with a few black wires. I was lost and totally lost track of what wire was what. I guessed and flicked the power on and then the sparks flew for a second or so. I shut the power down, and tried a diff. combination but now it doesn't work at all, and neither does the outlet that is about 4 feet directly below the light switch area. Basically Im curious as to what happened. Im on a breaker panel not fuses, so it can't be that. I assume I just shorted out a wire, but Im hoping it won't be too much to fix. Any answers from anyone out there?