Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Scanners (https://www.askmehelpdesk.com/forumdisplay.php?f=464)
-   -   Can not scan (https://www.askmehelpdesk.com/showthread.php?t=391805)

  • Aug 30, 2009, 09:48 AM
    agbesikudjjo
    Can not scan
    I bought packard bell diamond 1200 plus scanner but when after installing the soft ware I can not scan.the message I had was my scanner is either not connected or the software is not properly installed.I am using xp service pack 3
    I have tried serveral times but the same problem.I don't if the scanner is faulty
    Help
  • Aug 30, 2009, 11:17 AM
    seahwk83

    Unattach the scanner and then uninstall the software you had installed

    -Now install the software that came with the scanner before connecting the scanner to the computer

    -Once the software is installed, attach your scanner and new hardware should be found and then installed properly

    Hope that helps out

  • All times are GMT -7. The time now is 01:53 AM.