I need to get a hold of a diagram to remove the door panel to fix the power window

Just to make sure I understand, do you need the diagram to remove the door panel or the electrical diagram of the window switch? I don't think I have a diagram of the door panel but I can check on the proper steps. Should be just remove a few screws/bolts from the middle and/or top area of the panel and then separate the panel from the door frame as it likely still has the factory seal and then lift. The bottom usually just slides down into place so lift to remove once all of the bolts are out, top may be similar, haven't done one in a while.

Once the panel is off you'll have to disconnect a few electrical connectors for the door locks and power windows and the speaker.

Yes, just the door panel. My daughter is away at college, and I wanted to give her some steps on how to remove the door panel. The window dropped and she needs to get it lifted enough to get it to a shop. We did it last summer on the back passenger window together, so she has some idea on how to do it. I just wanted to see if I missed anything important, and you answered my question.

Thanks
Danny