My kenmore 90 series dryer (Model 110.62902100) runs but does not produce any heat. I've checked the house breakers and they are fine. I finally figured out how to open the front bottom cover, but don't know what to do from there.

What parts should I check in what order, and where are they and how do I check them?

I do have a meter, for checking continuity and such.

I've fixed my washer numerous times and that was easy, but I seem to be clueless when it comes to the dryer.

Gas or electric?

Electric

If its gas it could be the igniter, start the dryer and watch the pilot there should be a piece that glows and then ignites the gas in the tube, if you don't get a glow then its probably the igniter is bad.it should unplug(the connector) go to appliance store with old one to get new one. If this is the problem.

Ignore my previous column thought maybe gas.

Electric, could it be the electric coil is broke, that's what heats up to dry cloths?

I have a Kenmore gas dryer 90 series, everything seems to be OK and working fine but there is NO HEAT... can anyone offer any advice??