Fixing an elbow on a pipe against an outside wall?
I have a leak on an outside pipe coming from the 90 degree elbow bend (I think). I have wrapped it in that hardening tape, but it still leaks (much less now). I would like to fix the leak completely, but here are my problems.
The pipe is right up against a wall, so getting around it is pretty hard. Below is a picture of the pipe. What about a 90 degree compression fitting? The problem with that sounds like I would need to cut the pipe with a pipe cutter and I wouldn't be able to do that seeing as the pipe is against a wall, right?
Does anyone have any other ideas? This is driving me crazy!
Thanks... josh
http://www.jother.com/misc/pipe.jpg