DSC 1832 with RFK5500 keypad, entry delay not working. Please help
So originally I worked through the manual, then wired it all together
Zone 1 PIR
Zone 2 PIR
Zone 3 PIR
Zone 4 wireless door
Zone 5 wireless door
Zone 6 not used
Zone 7 not used
Zone 8 smoke
So when I first hooked it up it seemed to be working fine delay exit and entry so I finished programming it with selections we had chosen and the entry delay quit working. So I was resent everythign to default and started troubleshooting and I have it working until I add the 3rd motion detector. As soon as the zone 3 PIR (which is also the only one different of the 3) is connected I tested it and the entry delay is gone again. Any suggestion I have tried eerything I can think of. Please Advise. Thank you