I need the wiring diagram for a 12 horse murray 40" cut approx 2000 model is 40605B from the solonid to starter
I need the wiring diagram for a 12 horse murray 40" cut approx 2000 model is 40605B from the solonid to starter
Hi! THIS-N-THAT1, welcome to AMHD :)
I tried to look-up diagrams, but my source only goes to 1990, and I think you have a year 2000 model by your reference to "approx 2000".
Also, your model # may be incorrect. I've been bumping into numbers like 425014X92E, and if you see a number like 96014000100 it was made by Sears.
Moving Thread
I'm going to move your question over to the G&P sub-forum, Tools & Power Equipment found here: https://www.askmehelpdesk.com/tools-power-equipment/ . There will be no redirect on your thread.
k
Hi,
No search yielded a result for the model stated. I have fairly good ones and that number was jumped over. I think your year is probable wrong as well (as stated by another.)
I did however come up with two diagrams (dependent on the switch.) Be aware that the only thing you actually asked for was the lead from the starter to the solenoid, so perhaps you should rethink the question.
I will attach two wiring diagrams; the difference is the number of wires to the switch, 5 or 6.
Peace,
Clarke
All times are GMT -7. The time now is 09:02 PM. |