Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Motorcycles (https://www.askmehelpdesk.com/forumdisplay.php?f=121)
-   -   Installing sportster fuel gauge kit on 2014 XL1200T (https://www.askmehelpdesk.com/showthread.php?t=832184)

  • May 9, 2017, 02:07 PM
    road glide rich
    Installing sportster fuel gauge kit on 2014 XL1200T
    Was able to make all connections with the exception of the orange wire, according to the directions in the kit it "splices to an orange/white wire near rear lighting connector 7A located in the seat pan area". There is no orange/white wire located anywhere in the seat pan area.
  • May 18, 2017, 07:04 AM
    Stratmando
    Personally I would get the Manual with a Schematic. Will help now. And will help you or others working on your bike in the future.
    Should only need a Ground, a Ignition Switched, A lighting wire, and a sender wire.
    Sorry I can't help more.

  • All times are GMT -7. The time now is 03:48 AM.