Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring Hot Tub and using a 50 Amp Double Pole GFCI Circiut Breaker
[ 10 Answers ]
:confused: I keep getting the GFCI breaker tripping after wiring my hot tub. I wired 2 hot Red and Black to the proper terminals and the White to the neutral and the Bare Copper to the ground Post at the tub. I am using 6-3 w/G per instructions. Could the GFCI breaker be bad? When I wire...
Hot Tub wiring
[ 2 Answers ]
I installed a gfi breaker at the main box but wanted to double check my work. The neutral white wire from breaker goes to the ground bar. But does the solid copper ground lead go their also? Thanks
Hot Tub Electrical Wiring
[ 1 Answers ]
I am getting ready to install a Dimension One spa that the manufacture calls for using #6-3 awg wire and 240 Volt - 50 Amp with a GFCI breaker and disconnect. I had the house pre wired for a hot tub and 240 Volt service. They installed a 50 Amp breaker in the main box and ran about 40...
New plumbing for whirlpool tub
[ 3 Answers ]
We just installed a whirlpool tub. We put all new plumbing in for the new tub and now we are having trouble with the water pressure on the cold side. Anyone have any answers?? Thanks
Adding plumbing for tub/ toilet to home
[ 1 Answers ]
We have an older farm home and are doing some remodeling and wish to add a toilet and a tub to our existing laundry room which consists of a concrete slab. What ideas do you have as to the plumbing applications that we could use to make this work? All the plumbing pipes are in the main portion... View more questions Search
|