Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to locate a vent for a sewage lift pump?
[ 11 Answers ]
I am finishing my basement and wanting to install a bathroom. I have cut the cement for my lines and lift station. I cut the hole for the lift station below my sewer line which is about 8' above. Now... what do I need to look for as far as venting? I have had one plumber come over to give me a...
Home sewage pump problems?
[ 3 Answers ]
60 gal. sewage pump in basement functions but walls and wires coat with a white chalky material that is very difficult to remove with a pressure nozzle on the hose, and difficult to impossible to scrape off. Can a material or chemical be added to the tank when full the would make this cleaning...
Good biological additive for sewage-ejector lift station?
[ 2 Answers ]
I have a 50-60 gallon (est) vented fiberglas tank in basement with sewage-ejector pump inside. All wastewater from toilets, sinks, showers, washing machines, dishwashers goes through this system. Generally runs well and pretty clean, but I would like to add some biological cleaner (non-toxic) to...
Having problems with sewage ejector pump
[ 1 Answers ]
Having problems with my sewage ejector pump runs all the time.This morning I pulled it from the basin and cleaned, reattached float. Still it runs even when the water level is low. Is it bad?
Having problems with sewage ejector pump
[ 0 Answers ]
My sewage ejector pumps runs all the time. This morning I pulled unit from basin and cleaned reattached float ,still runs all the time.Tell me is my pump gone. View more questions Search
|