Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New hot water heater installed, but no hot water pressure. Plenty of cold water?
[ 11 Answers ]
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Low hot water pressure through the whole house even ater replacing water heater
[ 2 Answers ]
I'm still experiencing low hot water pressure even after replacing the water heater. When you first turn on the faucets the pressure will be fine but within a few seconds it drops again.
No water to both sinks / very low cold water pressure to bath and washer
[ 1 Answers ]
My kitchen and bathroom sink have no water, period. Hot water seems to be pretty good to the bath and washer but cold water to those 2 locations are very weak. The outside faucet is very weak at best. I have had this problem for quite some time so it's not the fact that they are frozen. I just...
Low water pressure oil hot water heating system
[ 1 Answers ]
How does one go about increasing water pressure in a baseboard heating system?
Low water pressure in bathtub/shower hot or cold
[ 7 Answers ]
My shower/bathtub has no water pressure. It does not matter if you turn the cold or the hot water on. The rest of the house is not having any problems with water pressure just this particular bathtub/shower. I tried removing the water spout to see if anything was stopping it up, but it won't... View more questions Search
|