Ask Experts Questions for FREE Help !
Ask
    nicolelp's Avatar
    nicolelp Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 24, 2011, 03:28 PM
    J-Pipe leaking where PVC meets metal ?
    In my kitchen I have replaced everything with PVC, for the most part, and it's working fine. I am having issues where the J-pipe (PVC) meets metal. I am leaking there despite many attempts at re-seating the pipe and trying again. It is a very difficult connection, and turns hard. It takes a while to get the threads to line up correctly.

    What am I missing?
    Attached Images
     
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Sep 24, 2011, 04:20 PM
    What you
    Re attempting to do is marry half of a PVC "J bend" to a chrome tail piece from a metal trap. What should be done is remove the metal tailpiece and convert to PVC.
    Good luck Tom
Not your question? Ask your question View similar questions
 

Add your answer here.


Check out some similar questions!

Water pump/witch is better pvc or metal pipe [ 3 Answers ]

When I Install 1 1/2 horse power submersible water pump at 100 Feet.witch would be the best to use pvc pipe or metal pipe

Joint between 1-1/4" metal drain pipe and 1-1/2" PVC pipe into P trap [ 5 Answers ]

In replacing a broken drain pipe in bathroom sink, I discovered that the original plumber used plumber's putty to seal the join between the 1-1/4" metal drain pipe and the 1-1/2" PVC pipe leading to the PVC P trap. I know not to use plumber's putty on PVC, but since two different sized pipes were...

Join pvc pipe to metal pipewith glue [ 10 Answers ]

Is there a glue on the market that joins metal to pvc I need to connect a 50mm pvc pipe to a 60mm metal pipe I have a connector (pvc) that will connect perfectly its got thread but the 60mm metal pipe is plain on the inside I have tried silicone but it can not handle the pressure. I am connecting a...

Connecting PVC P-Trap to Metal Waste Pipe [ 3 Answers ]

I am replacing the drain in the bathroom lavatory. Is it OK to connect PVC to the existing metal pipe in the wall?

Plastic PVC Broken in Metal Pipe Joint [ 2 Answers ]

Was digging in the yard and broke the PVC pipe connected to a metal pipe inside the joint. The PVC and joint is 3/4 inch however the PVC is glued inside the metal and now I can't get the old PVC out of the metal joint to replace it. I don't have any tools to cut the metal pipe. Is there anything...

View more questions Search