I try to see my system statut but I can't:)

192.168.0.1 isn't a system status report, it's a configuration page for some different types of network hardware. If you've got a router you're trying to configure, you have to be sure you're using the right address. Click start, go to RUN, type CMD and hit enter. Then type ipconfig /all and hit enter again. The number listed under "Default Gateway" is generally what you would go to if you wanted to configure a router.

Quote:

---

Originally Posted by retsoksirhc

192.168.0.1 isn't a system status report, it's a configuration page for some different types of network hardware. If you've got a router you're trying to configure, you have to be sure you're using the right address. Click start, go to RUN, type CMD and hit enter. Then type ipconfig /all and hit enter again. The number listed under "Default Gateway" is generally what you would go to if you wanted to configure a router.

---

It may also be the address of the first computer on the LAN.

Quote:

---

Originally Posted by Tj3

It may also be the address of the first computer on the LAN.

---

I'm not quite sure what you mean by that... Default Gateway is the node in the network that packets are to be sent to if a subnet that matches the destination for the packet isn't found in the routing table of the local computer. So, it will always be a router, unless you don't want to be able to connect to anything outside your subnet.

The default gateway address can be anything. I could make it 192.168.0.34 if I wanted to.
It seems easy to make it 192.168.0.1 by convention. Maybe, someone else likes 192.168.0.254 as their gateway.

Besides, you can have two gateways. Selected and used based on a metric, but only one default gateway. Thus, you can have a backup gateway would your primary one fail.

Quote:

---

Originally Posted by retsoksirhc

I'm not quite sure what you mean by that...Default Gateway is the node in the network that packets are to be sent to if a subnet that matches the destination for the packet isn't foudn in the routing table of the local computer. So, it will always be a router, unless you don't want to be able to connect to anything outside your subnet.

---

It depends upon whether you have a router in your LAN or if it just a hub or similar arrangement.

192.168.0.1 is the default gateway for a single PC which is not a part of any network. We can configure router from web browser by logging through this address. Of course 192.168.xxx.xxx can be the manually configured address of a computer in a network.

Kya mere laptop ma webcam. Net sa load ho sakta hai.
Mujha economic ma problem hoti hai, kyon ki Maine graduation [b.a.] art side sa hai.
Plzzzzzz help me aap mujha idea de sakte hai hum kaise pedhe.