Check out some similar questions!
Wood burning stove blower thermostat
[ 1 Answers ]
I bought a new blower fan for my buck wood burning stove insert and the thermostat that used to have 3 speeds high, med & low now only works on high. I figure I hooked the wires up wrong when I got the new blower fan. Any suggestions on the wiring? Eric
How do I hook up a new stove into a new outle?
[ 1 Answers ]
Well my stove and my oven had two different outlets and I just bought a stove that has a oven with it and the new stove has 3 wires a black a white and a red . And the wires from my outlet has two so I was wondering if I could bridge the black into the red?
Wood stove
[ 9 Answers ]
I built a 36in. Dia X 40 in.wood stove from 1/4 in. thick gas line pipe. The chimney is fabricated from 6 in. stove pipe which passes through a window opening and run up the side of the building. The overall length of the stove pipe is 15 ft. The top of the pipe is 3 ft. above the peak line. My...
Wiring thermostat to wood burning stove
[ 1 Answers ]
Thank You Mike, What I did was just hooked up a squirrel cage with a motor to the wood burner. Now I want to make it run off a thermostat. Just have the two wires coming off the motor.
Wiring thermostat to wood burning stove
[ 1 Answers ]
I have a wood burning stove in my pole barn. I have add a blower to it and want to control the blower to turn on & off by way of a thermostat. Could anyone help me with this? View more questions Search Add your answer here.
|