Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Jumper wire at furnace to bypass thermostat...
[ 2 Answers ]
Hi, I am wondering if anyone has an easy step by step process that I can follow to jumper my thermostat at the furnace. If I do not have access to the thermostat (upstairs and the landlord isn't home, but I am working in the tenants apartment in the basement) and I want to check my manifold...
How to bypass Robert Shaw thermostat from early 70's era
[ 0 Answers ]
It is very old not digital I want to bypass it to turn on thew heater is this possible? Please respond with helpful information
I have an old Robert Shaw thermostat how do I bypass it to turn on the heater/
[ 0 Answers ]
I live in an old house that has a old floor heater, the thermostat will not turn the heat on. How can I bypass the thermostat and turn on the heater? The yellow wires are connected to the Mercury and the black ones are connected to screws.
How do you bypass a honeywell basic programmable thermostat to run a/c until bad thermostat is replaced
[ 2 Answers ]
Just a quick question.
How do I jumper a TX500B Thermostat, bypass the therm. To see if it's working?
[ 6 Answers ]
I hear the thermastat click when I raise the setpoint above the measured temp, but nothing happens. I want to jumper out the therm. just to eliminate it as the problem. From left to right - I have G, Y, W, RH & RC - there is a jumper from RH to RC, with a red wire connected. I do read 28 VAC from... View more questions Search
|