Ask Experts Questions for FREE Help !
Ask
    MAXXDIAMOND's Avatar
    MAXXDIAMOND Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2013, 11:19 AM
    Magic chef furnace models
    I have model g6a1250-s gas furnace. It has five burbers on it. The middle one only burns halfway down. I have done everything I can thinf of to fix this ,can you help.

Check out some similar questions!

Magic chef furnace/ ac outside unit [ 0 Answers ]

I have an old Magic Chef A/C Furnace combination unit outside. It is green and the only identifiable marking are ANS- Z21.47. Do you have a wiring schematic and trouble shooting manual for it? My email address is [email protected]

Magic Chef furnace [ 1 Answers ]

Hello, I have an older 80s model Magic Chef furnace - G83-75D-5. The furnace worked fine all last winter. I put in a new air filter in prep of winterizing and now the unit will not come on. The paperwork says to be sure the door is replaced correctly due to the safety interlock switch... I have...

Magic chef furnace models [ 0 Answers ]

I have a Magic Chef LP gas furnace (Model EG6E100DC-1). Last week the heat wasn't kicking on in the morning and found that the draft inducer blower had cooked a bearing. I shut down power to the unit, removed the blower, sourced a new blower, installed exactly as I had removed it. The draft inducer...

Magic Chef Ulta 97 Furnace [ 1 Answers ]

I have an Ultra 97 gas fired heater made by Magic Chef. I assume its about 15-18 years old. When the heater kicks on, the only thing that happens is that the blower starts running but the ignitor does not ignite. There are 2 flat cylinder type switches when you open up the door. If you tap on...

View more questions Search
 

Add your answer here.