Ask Experts Questions for FREE Help !
Ask
    Gilcar's Avatar
    Gilcar Posts: 1, Reputation: 1
    New Member
     
    #21

    Oct 12, 2011, 06:38 PM
    I have a Harman p68 pellet stove with a stardard two wire stat feature. What terminal points on the Honeywell rth2300 should be used?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installed new honeywell rth 7500 thermostat [ 3 Answers ]

I recently installed a honeywell rth7500 thermostat and am not sure if it is correct. The old thermostat is a GE, not sure how old. I have a heatpump system (Goodman A61-20) I wired it as follows: Old R(red)- new R Old O(orange) - new O/B Old G(green) - new G Old Y(yellow) - new Y Old...

Honeywell RTH 6300B thermostat installation. [ 1 Answers ]

I have electric heater and a air conditioning unit, I do not have a heat pump. I wired my Honeywell RTH6300B thermostat I removed the jumper as per the instructions in the installation guide. I put the red wire in the RC connector slot I put the blue wire in the R connector slot, I put the yellow...

Honeywell RTH 7000 Thermostat Installation [ 1 Answers ]

I have an old Honeywell thermostat (model T874C1000) and want to install a new Honeywell RTH7000. The old one had 2 mercury switches for the heat and one merc switch for the a/c. As the outside compressor indicates Heat Pump, I'm assuming I have a 2-stage heat pump system. The wiring...

Honeywell rth 230B thermostat [ 1 Answers ]

Need part no. and location of dealer for replacement filters, as my filter light is on. Also need instructions on replacing.


View more questions Search