Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring up a new blower motor for my furnace
[ 6 Answers ]
I have a Rheem furnace that is at least 10 years old, could be as old as 20. I had to replace the blower motor which was a 1/4 hp and the motor I replaced it with was able to be 1/8, 1/4 or 1/2 hp. Depending on how it is wired. From reading on the capacitor I could hook this up as a 1/2 hp which...
Add on coal/wood furnace thermostat wiring for 2 zone house with oil furnace
[ 1 Answers ]
I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...
Goodman furnace will ?heat motor? And blower motor will run but not at same time
[ 2 Answers ]
I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?
Very old furnace to new Blower motor wiring
[ 10 Answers ]
Hello, I have an old GE furnace, from the 1960's I believe. Today the blower stopped working. I pulled the blower unit out and found the bearings destroyed on one side. I had no luck finding new bearings. So as a last resort a friend had an old furnace he had repalced with a blower motor that...
Furnace blower motor wiring
[ 2 Answers ]
I have an old furnace blower that I want to convert to a shop air clearner. I want the motor to operate from a normal 110 volt switch. My question is which wires do I connect to the switch? The motor is a 1/2 hp Emerson Model K55HXLGG3702 It has 6 wires - black, white, brown, blue, red, yellow View more questions Search
|