Ask Experts Questions for FREE Help !
Ask
    Sans12958's Avatar
    Sans12958 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 6, 2013, 08:40 AM
    Armstrong Air Ultra 80 Fuel Oil Heating Furnace
    Tried starting my furnace and all I am getting is a humming noise coming from the Honeywell Intermittent Ignition box. Any suggestions for testing or do I need to replace it?
    My cellar was flooded this summer, all was under water. Let everything dry out for the past 3 months and just tried to start it as the weather was a little chilly here. Can't afford the furnace man, any help is appreciated.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Sep 6, 2013, 05:29 PM
    In all probability your burner motor needs to be replaced. The best thing to do is replace any electrical components which were under water. This could include the burner motor, ignition transformer, Honeywell ignition control box, & blower motor.

    Almost certainly the burner & blower motors will need to be replaced.
Not your question? Ask your question View similar questions
 

Add your answer here.


Check out some similar questions!

Armstrong ultra III 80 furnace problem - cold air [ 0 Answers ]

Hi, I have an Armstrong ultra III 80 gas furnace that is blowing cold air. If I reset the furnace, I get heat but after the initial reset, I get cold air as oppose to heat. I have replaced with a new filter, area is unobstructed. I checked online and someone with a similar problem has indicated...

Armstrong air ultra sx 80e furnace [ 0 Answers ]

The flashing light says "limit switch open". I have cleaned the filters but the light still flashes 4 times. What do I do now?

Armstrong air ultra sx 80 furnace [ 7 Answers ]

I have an Armstrong Air Ultra sx 80 model# GUJ075D10-2B. The furnace has satisfied the call for heat and everything has shut off and waiting for the next call. The problem is on the start-up. When the igniter starts the flame, it is like there is a small build up of gas in the heat exchanger and...

Armstrong-Air Gas Fired Furnace G1D91AU NOT heating properly! [ 6 Answers ]

I have an Armstrong-Air Gas-Fired furnace G1D91AU and maybe a programmable thermostat. The system is around six years old and it has started causing me problems this winter. The system has been inconsistent when following the preprogrammed settings. It will NOT warm above 70 degrees no matter...

HEIL Fuel Oil/Forced Air Furnace [ 1 Answers ]

The furnace was installed in 1979... The Furnace ignites and heats but the blower won't come on... I've called some furnace repair places and they are telling me they don't work on Fuel Oil Furnaces anymore. If someone can give me an idea as to what the problem could be, and or what kind...

View more questions Search