Ask Experts Questions for FREE Help !
Ask
    gilbert_c's Avatar
    gilbert_c Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Apr 10, 2006, 12:30 PM
    Wiring Timer Clock, Off /On switch to Pool Pump
    I recently replaced an underground electrical line for my pool pump. Now I'm not certain of the hookup from the main power (220)to the timer clock (also 220)into the manual off/on switch mounted in it's own box on the back of the timer box, to the pump motor. Can anyone help me here. It's a single speed hook up. Thanks
    Gil :confused:
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Apr 10, 2006, 12:37 PM
    What make and model timer do you have?
    gilbert_c's Avatar
    gilbert_c Posts: 6, Reputation: 1
    New Member
    		  
    #3

    Apr 10, 2006, 01:15 PM
    Timer is an Intermatic WG-1573? 208/277 V dpdt
    That's about the best I can do for the model
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #4

    Apr 10, 2006, 05:04 PM
    The model number given is only for the timer motor in the time clock.

    Can you look at Intermatic's Pool timer catalog:

    http://www.intermatic.com/images/cat...89_PoolSpa.pdf

    And pick out your timer?

    Not even sure if you do find it I can be of any help, as I cannot find any connection diagrams at their web site.

    Usually, the Line input connects to Terminal #1 and #2, and the load wires to the pump, connect to #3 and # 4.

    Is there a wiring diagram on the inside of the door?

    Just found the entire list of manuals at:

    http://www.intermatic.com/?action=cat&cid=91&did=10

    If you can tell me the timer model # or find it in the list , you will find the wiring diagrams to follow.
Not your question? Ask your question View similar questions
 

Add your answer here.


Check out some similar questions!

220 Volt Pool Timer [ 3 Answers ]

I am trying to install an Intermatic Swimming Pool Mechanical Timer 220V - T104P3 to my exciting pump. I have two live wires coming from the breaker box which I labeled Line 1 & Line 2, there is also a ground wire. Then I have to wires coming from the pump which I labeled Load 1 & Load 2. I have...

Timer For Aboveground Pool Pump [ 5 Answers ]

Hi! I am a pool novice. I have a frameset aboveground pool with a cheesy pump - 1/16 HP, 120V. It's plugged into a heavy duty garage outlet, but it's not clear if it's a GFCI. What kind of pump timer can I use that is safe and inexpensive, possibly GFCI? Thanks!

Running a 110v Sw off a 220v pool timer [ 5 Answers ]

Help, I have a Pool timer that is wired 220V for the pool pump. I have a separate 110v wire that was switched from my guest house to turn the pool lights on. There is a short in that wire now, possibly a wire breakage in the cement from shifting? Anyway, I've since unhooked it. My question...

Pool pump motor [ 0 Answers ]

Our pool pump motor plug has been replaced twice because when you try to plug it in it sometimes sparks and other times gets so hot it fusses to the outlet. Is this cord not grounded inside motor? Or any other suggestions? The pool is inground the pump brand is Lomart 1 hp & the motor is a baldor...

View more questions Search