Ask Experts Questions for FREE Help !
Ask
    GEORGE HUBBARD's Avatar
    GEORGE HUBBARD Posts: 9, Reputation: 1
    New Member
    		  
    #1

    Feb 23, 2006, 02:08 PM
    Wire Size For 200 Amp Service
    Recently purchased new mobile home with a 200 amp breaker inside.the distance between the outside pole and inside breaker is about 70 feet.what size,or type,or gauge wire do i need to run.
    Lost in paradis... :) :confused:
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Feb 23, 2006, 02:31 PM
    There is a type of cable for moblie homes, aluminum underground service feeders , see the attachment.

    Typical 200 amp feeder for 70 feet will be the #4/0-#4/0-#2/0-#4 cable.

    It is rated for direct bury, but you may consider installing a 3" PVC conduit to sleeve and protect the cable most of the distance.

    Be sure to read the manufacturers instructions for terminations, usually need to be wire brushed and have anti-oxidant compound applied. Incorrect connections are the only reasons al wire is noted for.
    GEORGE HUBBARD's Avatar
    GEORGE HUBBARD Posts: 9, Reputation: 1
    New Member
    		  
    #3

    Feb 23, 2006, 02:45 PM
    Thanks Again Tk.
Not your question? Ask your question View similar questions
 

Add your answer here.


Check out some similar questions!

Bathroom wire size [ 2 Answers ]

I know that a 20 amp breaker and a GFCI plug are required in a bathroom. Does this mean the wire size has to be 12 gauge or can it be 14? If I wire the bathroom lights on the same circuit, can I splice in and use 14 gauge for the lights on a 12 gauge feed?

Wire size for Outlets in basement family room [ 6 Answers ]

I am finally getting around to doing our family room in the basement. I was wondering what size wire to pull for the outlets should I use 12/2 with ground or 14/2 with ground. Also putting in recess lights should I use 12/2 with ground for them or 14/2 with ground. Thanks T

Ground Wire for new Service Drop [ 2 Answers ]

I am upgrading my house to a 200 AMP. This requires a new service drop and panel. The technician that came out and gave requirements says I need to run a ground wire that connects my natural gas line, to my water line, to a 8' ground spike and to the new panel. He instructed me to have few as...

4 wire home service entrance wire size [ 1 Answers ]

Mobile home requires 4 wire electrical service entrance wire. Distance is 160 foot from meter to breaker panel. 220V service. What size wire do I use? Can I use diff. size for neutral and ground?

How do I figure out what size wire to use on a 200 amp service. [ 2 Answers ]

My question is... how do I figure out what size wire to use when I know the Amperage of the electrical device. Is there some form of electrical calculation? For example I want to upgrade to a 200 amp panel from a 70 amp panel.

View more questions Search