Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing a hunter ceiling fan & light control to operate my fan w/light
[ 3 Answers ]
I just replace my kitchen light with a new ceiling fan w/light. I now was going to try to install my hunter ceiling fan & light control switch. The switch has a black, blue and red wire w/green ground. The wall outlet has a black, red and white wire with ground. I just wasn't sure which wires...
Ceiling fan light pulses when computer is on
[ 1 Answers ]
I have had a ceiling fan with light kit installed for several years. Just got a new computer and now the light pulses (like a disco strobe in slow motion). Problem will sometimes correct itself while I am working on the computer, other times, I have to just turn light off and work in the dark. Any...
Trying to wire ceiling fan switch and 2-3way light switches for ceiling lht/fan combo
[ 5 Answers ]
I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....
Installing a light kit on a ceiling fan where a switch enables both fan and light
[ 2 Answers ]
I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ... View more questions Search
|