I have a Hunter ceiling fan, model 25466 with a light kit. While wiring the light fixture some of the wires were pulled loose. I need to find out what wires go with which ones to fix it. Going into the fan are three wires, one black, one white, and one black and white striped. On the bottom of the fan going into the light fixture are one white, one black, one yellow, one pink, one gray, one red, and the black and white striped wire.
Connected to the reverse switch are two yellow and two pink wires and one white. Connected to the three way pull chain switch are the one black wire from the fan, as well as one gray, one brown and one green wire that also goes to the 5uF resistor (large) and from this resistor there is another gray wire that looks to be wired to the other gray wire that goes into the reverse switch. There is another resistor that has one red and one white wire coming from it. There were four white wires connected together but one of these pulled loose from something inside. How can I figure out which wire the white wire connects to?

The next question would be, which wires do the black and white wire from the light fixture hook to?:eek:

All the white wires connect together.

Light connects to the whites, and to the black/white striped wire.

My light in my hunter does not work. My husband pulled it apart and now I need to know how to wire it back together. Do you have a picture on how to wire it back,or a vidio? THANK YOU FOR YOUR HELP

I have a hunter model 25572. Wirring pulled loose during move.Out the bottom I have Blk,Wht,Grey,yellow,red coming out of the fan and a larger what wire ending out the top(probably common) I also have a blk and stipped Blk coming down through the fan top to bottom. I figure the blk is power(hot) Whish wires go to the switch( appears to be three speed) and which goes to the capacitor? Thanks for your help.

I have an older hunter fan.. probably 30-35 years old. The light stopped working and I went in and had to re connect some wires that had burned away due to too large wattage in the bulb. The fan was working wonderfully,just the light was affected. I reconnected the wires and now the light works great,but the fan is no longer working. I could have not wired it back correctly,but can not find any diagrams that have the same kind of wiring that this fan has. I have 2 black wires coming from the fan,and two white wires coming from the fan.I have 3 black wires coming from the light kit and one white... Can someone please tel me how to reconnect them to make both the light and the fan work? Thanking you in advance!
[email protected]

Hi. I hooked up my light kit. White to white and black to black with whie line. They were wrapped and said to light kit. Lights did not work. But there is 2 red wires hooked together. Any sugestions