I have lost the instrutions on how to program my Westinghouse 6 outlet stake timer model 28011. Can you help me?
I have lost the instrutions on how to program my Westinghouse 6 outlet stake timer model 28011. Can you help me?
I am in need of the same answer for the exact model #. I'll let you know if I find anything.
F***** buttons on 28011 don't align with the buttons stated on the instrux link given above.
I finally figured this out myself!!
To program time settings:
FIRST SET THE TIME
Set time with set time button, choose hour and minute
NOW SET ON-HOURS , AND OFF-HOURS
Slide switch to timer
Press mode
Program #1 on should appear
Press set time
Days should be blinking
Press Day until desired day combination appears
Press set time
Press hour until right hour
Press min until right minute appears
Wait to quit blinking
Press next program, it will change to
Program 1 off
Repete steps above for off time
Photo cell setting:
Slide button to photo cell
Press mode
Press photo set until you get the number of hours you want to stay on
--cheers
Kelly
To program time settings:
FIRST SET THE TIME
Set time with set time button, choose hour and minute
NOW SET ON-HOURS , AND OFF-HOURS
Slide switch to timer
Press mode
Program #1 on should appear
Press set time
Days should be blinking
Press Day until desired day combination appears
Press set time
Press hour until right hour
Press min until right minute appears
Wait to quit blinking
Press next program, it will change to
Program 1 off
Repete steps above for off time
Photo cell setting:
Slide button to photo cell
Press mode
Press photo set until you get the number of hours you want to stay on
To program time settings:
FIRST SET THE TIME
Set time with set time button, choose hour and minute
NOW SET ON-HOURS , AND OFF-HOURS
Slide switch to timer
Press mode
Program #1 on should appear
Press set time
Days should be blinking
Press Day until desired day combination appears
Press set time
Press hour until right hour
Press min until right minute appears
Wait to quit blinking
Press next program, it will change to
Program 1 off
Repete steps above for off time
PHOTO CELL setting:
Slide button to photo cell
Press mode
Press photo set until you get the number of hours you want to stay on
A couple of the previous answers refer to a domain name (thencc.com) that apparently no longer exists. Another answer provides instructions for a timer that seems to be different than the model 28011. I was able to find the instructions for the Westinghouse 28011 at the following link: http://waterheatertimer.org/pdf/Westinghouse-28011_Manual.pdf
OMGosh this is driving me nuts. I have this model number but no where on the actual timer is there anything labeled "mode." The instructions on the box say to press mode as well as the manual. I cannot figure this out! Even the photo of the front of it on the box doesn't have anything called "mode." Any help would be greatly appreciated!
Best,
Kate
All times are GMT -7. The time now is 05:25 AM. |