Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Harbor Breeze Ceiling Fan w/ Light
[ 11 Answers ]
Please help! I cannot figure out how to change the burnt out light in my ceiling fan. I have tried turning the glass portion, but it won't budge. Any ideas? I've tried the Harbor Breeze website, but cannot find the manual online. :( Thanks!
Ceiling Fan working, Fan light not, Harbor Breeze
[ 7 Answers ]
I recently tried to help a friend install a Harbor Breeze ceiling fan w/ a light kit (this model 52" White Ceiling Fan ENERGY STARŪ) The fan has 4 wires: green, white, black, and blue. The house has 3 wires: green, white, and black. Per the instructions we hooked up the green to green,...
Harbor Breeze Ceiling Fan Light Kit
[ 3 Answers ]
I'm replacing an old ceiling fan. The fan was controlled by the pull chain and the light by the wall switches (2 three-way). The new fan is a Harbor Breeze. Installed it, the light works with either 3-way switch. The fan works fine on all speeds. However, when the fan is turned on with the light...
Harbor Breeze Fan Light Switch
[ 5 Answers ]
Switch was bad but when replaced now the circuit break kicks. Put the new switch on another fan and it does the same thing there. Bought another new switch and it kicks breaker on both fans as well. These are two wire switches so no room for being wired wrong. Need help in determining if switches...
Harbor Breeze fan/light with remote
[ 1 Answers ]
I have recently installed a Harbor Breeze fan/light with remote. It is operated by a 3way switch. Each time the switch is turned on, the fan and/or light has to be "manually" turned on with the remote, even though the light was "on" when the switch was turned off. Appears to be no memory in the ... View more questions Search
|