Ask Experts Questions for FREE Help !
Ask
    christinarwalker's Avatar
    christinarwalker Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 25, 2006, 12:01 PM
    Hampton Bay remote control codes
    Hi,

    The code on the remote control to my ceiling fan has somehow reset itself. Someone has told me that the code can be found somewhere on the fan, but I was unable to find it. Does anyone know where I could find the code? Thank you and Merry Christmas.

    Christina
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Dec 25, 2006, 08:10 PM
    You have to match up the dip switches in the remote to the ones in fan. They are in a few different locations depending on the fan. See:

    http://www.ceiling-fans-n-more.com/c...e-controls.php
    joeyrvv's Avatar
    joeyrvv Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Dec 27, 2006, 10:09 PM
    There is a remote receiver switch in the top of the ceilling fan. There is a code set on it. That code has to match the one in the remote control. It is located inside where you put the battery in. you have to pull the fan down to got to the remote receiver unfortunately. Hope this helps.
    sznn7777's Avatar
    sznn7777 Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Jan 19, 2007, 12:31 PM
    I have several Hampton Bay ceiling fans and some have the receiver for the remote in the light kit and some have it in the wiring at the top of the downrod. I would look in the light kit first, as it is easier to remove and replace than the top of the fan near the ceiling. Good luck!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #5

    Jan 19, 2007, 12:49 PM
    Sometimes it is in with the motor and then usuallu the dip switches are accessible on top of the motor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Hampton Bay Remote Video/fan Remote Control [ 16 Answers ]

I have a Hampton Bay Video & Fan Remote Control (Model #UR8050T). It has been working fine for about 2 years until it recently began malfunctioning. It still operates the television, but the use of the fan/light features has stopped working. It will not turn the fan on or off, and the light is...

Hampton bay fan remote control [ 4 Answers ]

What is the best way to trouble shoot the remote / rcvr on the fan? 1997 vintage, led on remote lights up, fan and light do not respond, other lights on the same Ckt, operated by switch work so the ckt is alive.

Hampton Bay Remote Control Installation [ 2 Answers ]

I am trying to understand the installation procedures for installing a remote control into a Hampton Bay (Mod. 197 878) Grammercy Fan. The reomote receiver has a total of 6 wires. One is the antenna wire, and that speaks for itself. There are black, white and blue wires on one side, and I...

Hampton Bay Remote Control - you [ 1 Answers ]

I moved to a new home a few months ago. The fans that are installed have Hampton Bay remote controls. In our master bedroom, when we turn on the light, the fans also start. In summer it was okay, but now we only want the light on. When we lower the fan to the minimum of "Low", the fan still runs...

View more questions Search