Have a Northport III 52" ceiling fan and can't figure out where to place the remote receiver. The installation manual says to place it in the upper canopy, but there's not enough room and after installing I can't secure the canopy. Any ideas on what I'm doing wrong?:confused:

I am placing two ceiling fans on one switch 30 feet from the floor. My question is two-part... Both fans are the same brand, Hampton Bay, and include remotes (also same and same dip switch settings... ) The fans DO NOT have a manual reverse switch, reverse is controlled through the remote(s)...

Hi, I bought a Hampton Bay Ceiling fan with a remote. I was able to put up the fan and it works along with the lights. When I tried installing the receiver on the fan, the fan will not work, with the remote, nor manually, as almost like no power is going to it... As soon as I remove the...

The yellow covered remote control receiver in the fan box is simply too big to fit in the decorative mounting bracket cover. The directions mention a receiver mounting bracket, that was not there, and wouldn't have fit inside either. Anyone had to deal with this yet? Instructions attached. Jim

I am trying to install a Hampton Bay receiver in an existing ceiling fan, model unknown. I have three wires coming out of the ceiling: black, white and red. These are connected to the fan wires: black to black, white to white and red to blue. The receiver only has two input wires: black and...