Kindly assist me to know the meanings of an Icon that look like engine oil icon, but it has a zig -zag line underneath at the fuel indicator side, also the meaning of Icon that look like camerathat appears under the ABS writing in camry 94 model

This one?

Attachment 14343

Quote:

---

Originally Posted by kitch428

This one?

Attachment 14343

---

No it's not. It looks like a jug that drops some liquid but it has a zig zag line underneath. In camry 94 V6 GX it's at the right side of the dash board. In german language manual which I don't understand it's written (Motorol nachfullen) and the other a vedio camera like or an entire engine pic. Please assist

Sorry, I cannot assist any further. It is out of my area.
I will post some links where you can try there. Just click on them.
In the mean time, make sure the proper oil level and coolant level are in the engine. You seem to have a problem with oil!

Camry/Camry Hybrid/Vista - Page 14 - Automotive Message Forums

http://en.allexperts.com/q/Toyota-Re...rbag-light.htm

http://www.fixya.com/tags/94_camry

http://www.justanswer.com/car/toyota...ash-1994-camry

Quote:

---

Originally Posted by kitch428

This one?

Attachment 14343

---

Could you tell me what this given indicator for please

http://https://www.askmehelpdesk.com...ts-icon6hl.jpg

Either a tail light or brake light malfunction.

See this... this might help you. I have the same problem, but I see that all the bulbs are OK. Must be the sensor issue.

http://www.estima-motoring.co.uk/Das...%20Lights1.jpg
http://www.estima-motoring.co.uk/Das...%20Lights2.jpg

Thanks!

Is there a way that the light can stay on, but no bulb is blown? I have a 1996 Camary XLE and I had a problem with my head light. Just before getting it fixed, the idiot light you show came on. Even after I fixed the headligt, the idiot light is still on. Then again, sometimes is was on and sometimes it wasn't.
I have checked the brakelights and they seems to be working fine and I have checed the tail lights and they too seem to be fine.
This light is driving me nuts.

"Is there a way that the light can stay on, but no bulb is blown?"

Yes. The light failure sensor, located in the trunk, above the drivers side wheel well, works on seeing the proper wattage of each tail lamp bulb. (not headlights)
A very common cause is the bulb in the rear window. It must be a 18W bulb. The small "peanut" bulb, or side marker bulb as some call it, simply won't work.
The one needed is specially made for the 3rd brake light.
Of course the others must be correct also.