Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    caroln242's Avatar
    caroln242 Posts: 17, Reputation: 1
    New Member
    		  
    #21

    Aug 7, 2010, 12:17 PM
    Thanks... I'll have someone look at it again. I'm about ready to give up and trade it in.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #22

    Aug 7, 2010, 12:25 PM

    No, you don't want to do that. Just have someone who knows what they are doing check it out. With a problem that severe, it should be easy to isolate and repair. My bet is that there's excessive wear in the outer tie-rod ends. Get both of them replaced and you will probably be fine.

    I'm surprised the last mechanic missed this. There are grease fittings everywhere on the front end of Jeeps. Did you regularly have them greased before? If not, have them do that for you.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Add your answer here.


Check out some similar questions!

What is back end and front end collection [ 1 Answers ]

What is back end and front end collection

1998 Jeep Cherokee Front driveshaft vibration [ 2 Answers ]

I've got a 1998 Jeep Cherokee with a pretty bad front driveshaft vibration. When I remove the front driveshfat from the vehicle and do 60mph it doesn't vibrate. When the driveshaft is installed it vibrates. I've replaced the U-joints in it, and even tried rotating the front axle for a better...

Front end and back end [ 2 Answers ]

Difference between front end and back end of web page?

Front-end vs. Back-end Tech Writing [ 4 Answers ]

What's the difference? Can someone give me an example of both? I'm SO confused! :confused: Thanks in advance. -HBG

View more questions Search