Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Whirlpool Cabrio Dryer
[ 16 Answers ]
We just had a new Whirlpool Cabrio washer and dryer (electric) installed today. I dried some towels and noticed an unusually loud humming and vibrating sound. I wouldn't expect this from a product with a "very good" noise rating rated by consumer reports. It's much louder than my old 17 year old...
Error code E1 Whirlpool Senseon Dryer
[ 3 Answers ]
My dryer keeps shutting off and I get an error code where the time remaining usually is that flashes E1. The only thing the manual says is to contact a repairman. I called someone a friend recommended and he cleaned it out but really didn't know anything else to do? Any help would be appreciated
Whirlpool Cabrio Dryer
[ 17 Answers ]
We purchased new Whirlpool Cabrio Washer & Dryer set from Sears. The washer has worked fine, but the dryer has not. The dryer was delivered and had a small dent on the front of the door. When we put clothes in the dryer and start it, the dryer is extremely loud. It sometimes has a piercing...
Whirlpool Dryer sets code E1 and shuts down
[ 2 Answers ]
I have a Whirlpool Calipso Dryer, when I dry clothes it will set a code E1 and shuts down. I was told that the thermostat was bad so I replaced it (part #3390291). This did not solve the problem. I have removed the lower front cover so that I could watch the element while the dryer ran. The element...
Whirlpool Cabrio Dryer
[ 2 Answers ]
A sponge fell down the opening of the "lint catcher" while it was out because I was removing back up lint. While the lint catcher fits back in, I do not know if it is dangerous to leave the sponge down there, and if so, I do not know how to get it out--tried with a hanger but couldn't catch on to... View more questions Search
|