I have relocated my washing machine upstairs on the 2nd floor in an existing bathroom. I had a double sink/vanity that I replaced with a single sink to get the washing machine adjacent to it. I intend to use the existing hot/cold water connections for what was the 2nd sink. Problem is they are...

OK.. is it possible for the discharge hose to pop out on its own? It was pushed in quite far and has a "kink" at the end of the hose to make me believe it even went down far enough to bend around a corner... I ask only because it was completely out and no one says they pulled it out.

Do you carry hot & cold hoses in the length of 12inches.

I am getting a new washer and want to put it in a different place that the old one. The problem is it's about 8 feet from the standpipe. Can I put on a longer piece of drain hose and use it? Thanks, Rick

I have a Kenmore washer and have a problem of water backing up in the drain pipe. It seems that it drains too quickly and thus the overflow. I the drain pipe comes out of the laundry room floor and there is also a drain on the floor. Could I add on to the drain hose to possibly slow the flow down?...