Ask Experts Questions for FREE Help !
Ask
    yogibear25's Avatar
    yogibear25 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 7, 2011, 02:38 PM
    Older magic chef furnace
    I have a older magic chef furnace and my father in law messed with the wiring now the pilot is lit but furnace won't ignite there are two wires from the gas valve both are black where do they go to
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Sep 7, 2011, 10:35 PM
    One goes to common, which is the one not feeding "R" on the t-stat, and the other one goes to W1. DrTom4444
Not your question? Ask your question View similar questions
 

Add your answer here.


Check out some similar questions!

Magic chef furnace wiring schematic [ 27 Answers ]

I have an old Magic Chef gas furnace in my garage. Gas is connected, but wiring for fan and thermostat are a question. 55K BTU, 12 amp blower. Need to know what wires to connect to thermostat. Also, there are three wires exiting furnace. I know which ones power the 110v blower, but there is a...

Magic chef furnace blower will not turn off help? [ 0 Answers ]

Does the blower have an on and off switch that I can turn off for now

Magic chef furnace models [ 0 Answers ]

I have a Magic Chef LP gas furnace (Model EG6E100DC-1). Last week the heat wasn't kicking on in the morning and found that the draft inducer blower had cooked a bearing. I shut down power to the unit, removed the blower, sourced a new blower, installed exactly as I had removed it. The draft inducer...

Magic Chef Ulta 97 Furnace [ 1 Answers ]

I have an Ultra 97 gas fired heater made by Magic Chef. I assume its about 15-18 years old. When the heater kicks on, the only thing that happens is that the blower starts running but the ignitor does not ignite. There are 2 flat cylinder type switches when you open up the door. If you tap on...

View more questions Search