My Kitchenaid dishwasher model # KUDL15FXSS5 does not appear to complete it washing, drying, sanitizing and clean cycles.

The "Washing" light stays on and then transitions to the "Drain/Cancel" light, then all lights go out (the "Drying", "Sanitized" and "Clean" lights never go on). The water drains, but the inside of the dishwasher is still very wet.

Does anyone know the button sequence to run the diagnostics program ?

Does anyone know the button sequence to reset the dishwasher ?

Thank you very much.

Here is one way,

https://www.hunker.com/13407736/the-...aid-dishwasher

Quote:

---

When the dishwasher fails to reset, even after checking the power to the unit and/or going through the reset operation, it means there is a potential problem with the control panel's

computer board

or its fuse may be blown. You can access the control panel and the fuse by removing the door panel if you have experience working with voltmeters and making these kinds of repairs; otherwise, contact a service technician.

---

In addition,

https://www.repairclinic.com/RepairH...ns-not-working

Let me know if this helps.