 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore ultra wash dishwasher won't drain
We have been scooping water out after we run a load. The cycle does run through, including the drain cycle, but the water is not draining. I do not see a "float" as mentioned on a previous posting. I hear sounds as if draining is taking place, but of course it is not draining. If a pump needs replacement (as suggested on previous post), how do I replace?
|
||||
Check out some similar questions!
Kenmore Ultra Wash Dishwasher - flashing normal wash and Cancel lights? Is there any easy fix to the flashing lights? I have the "normal wash" and "Cancel" lights flashing. The dishwasher does not work. Model: 665.1385
I got a kenmore ultra wash quiet guard deluxe dishwasher for Christmas. My husband installed it and it seems like it is stuck in the wash cycle. It ran for an hour and a half and it never drained, so we finally shut it off. Any suggestions?
Hi, we inherited a Kenmore ultra wash dishwasher with a house 2 years ago. It has worked reliably until last week. Now there is about 2" of standing water in the base. I ran it through the cycle once to see if it clear it out but it didn't. Any suggestions? We normally are very good at rinsing off...
Hope someone has the solution to this. I purcashed a 9 year old house with appliances last fall. The Kenmore Ultra Wash diswasher is not drawing hot water on the wash cycles. It does appear to draw it during the final rinse. I have no manual.. I have read about re-setting, but am not sure if that...
My Kenmore dishwasher stopped draining about 2 weeks ago. After the cycle has completed there is about 2" of water in the bottom. If I turn the knob to the last drain cycle the water will drain.
View more questions Search
Add your answer here.
|
