Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   My Kenmore gas drter has low heat "HELP" (https://www.askmehelpdesk.com/showthread.php?t=38176)

  • Oct 20, 2006, 03:15 PM
    keith93611
    My Kenmore gas drter has low heat "HELP"
    Hello to all

    I have a Kenmore elite large capacity gas dryer model # 110.70942990, SER: MK2413999
    The problem I am having is I only get low heat when its on the cotton setting, in the last week it has been taking about 2 hours to dry a normal load that use to takes about 45 minutes, in the past I had a similar problem except I had no heat at all so I replaced a heat sensor and it fixed the problem, dose anybody have a fix for this problem?
    Thank you
  • Oct 20, 2006, 07:14 PM
    Kender
    Normally low heat and slow drying is due to slow venting. The drier will start overheating and turn off the heat early. Make sure the venting is clear. You can test this by unhooking the venting and drying a load and see if it dryes normally.

  • All times are GMT -7. The time now is 08:34 PM.