 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Elite Dishwasher model 665.1315 - won't run
The clean light is flashing and the unit won't run. The start button flashes when I push it.
The manual says to be sure the water is turned on... which it has been for the past 3 years as the unit has been working well... but it just stopped working. Is there a way to force the water on to be sure the unit is getting water? I pushed the Normal wash and heated dry buttons a couple of times each, all the lights came on, I pushed cancel and closed the door and it went through a drain cycle (as I'd splashed some water around in it to ensue the unit was not sensing suds). But after it drained - it went back to flashing the clean light when I tried to start a new cycle. Any suggestions? (.. and is there a way to confirm water flow?) |
||||
Check out some similar questions!
Kenmore elite dishwasher model 665.16293400
[ 3 Answers ]
Door will not open properly. Falls down
Kenmore Elite Dishwasher Model 665
[ 0 Answers ]
Timer seems to get stuck on 82 min. if you shorten cycle it stops on 39 min.
Kenmore Elite Dishwasher Model 665.15979
[ 1 Answers ]
I have a kenmore Elite model dishwasher and the Lock On light is flashing. I have attempted to press the No Heat Dry / Lock Off button to turn off the Lock On feature (in accordance with the owners manual) but nothing happens. The only button on the control panel that works is the Drain / Cancel...
Kenmore Elite Model 665 Dishwasher won't Start
[ 5 Answers ]
We have a Kenmore Elite Model 665.15952 (or 15953/15954/15959) Dishwasher. After six months of not using the dishwasher, whenever one presses the "Start" (or any other) button, only the "Quick Rinse" light blinks on and off. There is no sound, and no dish washing. I've turned off the house...
View more questions Search
Add your answer here.
|
