Johhny2
May 31, 2005, 12:44 PM
Hey I got a Lawn Chief Brigg and stration 11hp
And the lights don't have any wire connecting to them so they don't work.
Any idea where the wires come from so they will work? Thanks for your help.
thebriggsdude
May 31, 2005, 08:42 PM
Well, there should be a wire on most old ones coming from under the flywheel, there's a alternator under there. One wire hookup, meaning it uses ground as its other... one wire from the lights hooked to positive with a switch in between will run off the alternator. Negative to ground. Or just hook it to the battery... but why use lights?? They draw power and doesn't give the battery a good charge during mowing... this is the general way I do them though... some are hooked through the key ignition on newer ones. The alternator should give out 12 volts.
Johhny2
May 31, 2005, 09:01 PM
Thanks Dude,
I dident really want the lights lol just needed to know they would work.
:)