PDA

View Full Version : Nothing works


helomech
May 23, 2007, 11:20 PM
I tired it use my A/C and it would not come on. No fan, no condenser, nothing. Then about 2 weeks later it just kicked on like nothing was ever wrong, it worked just fine for about 3 days. Now, again nothing is working. I can't get the heat, A/C, or fan to kick on. Sometimes the thermostat will make the clicking noise, sometimes it won't. The thermostat is only about 6 months old. Anybody got any ideas?

hvac1000
May 24, 2007, 12:26 AM
Check the circuit breaker for the furnace and A/C. Check the fuses outside for the A/C.

helomech
May 24, 2007, 02:31 PM
That was the first thing that I checked. Could it be the wiring between the thermostat and the units? If so how would I go about checking them?

NorthernHeat
May 24, 2007, 02:58 PM
Turn on the thermostat and wait for the delay. See if you have 24 volts to the green and yellow terminals in the furnace, I'm going to take a guess the problem is a loose connection in the stat' check the red wire good.