I have a kitchen drain in which the pipe is embedded in cement. It broke off right at the top of the cement, which is 3 feet thick. I need to connect the drain pipe to it. What should I use. I have tried epoxy and it did not adhere to the cement.

If I were faced with this problem I would chip the cement from around the pipe down a few inches and install a Fernco Shielded Coupling,(see image) and couple a piece of pipe onto the coupling to bring it up out of the cement. Or if PVC just prime and glue on a PVC coupling and bring it up that way.
Good luck, Tom

I have a kitchen drain in which the pipe is embedded in cement. It broke off right at the top of the cement, which is 3 feet thick. I need to connect the drain pipe to it. What should I use. I have tried epoxy and it did not adhere to the cement.
Thank you. I will do just that. You are the only one who could help me. Thanks again.

"You are the only one who could help me."
Thanks for the compliment but any one of the experts here would have told you the same thing. I just got to you first. Good luck and if we can ever be of help just click on back. Tom